Agrowdrill Components

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  ...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  ...

Special washers made for the seed box on Agrowdrills. Used on the gate arms and varibox adjustment arms.

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here.The gate hex shaft is ...

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

This spacer ring has an ID of 60mm and is primarily used on Drive & Wheel arm assemblies.

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

(x2) offsets are required to update an AD230. This is intended to shift the front tynes forward by 150mm in the case that the tyne is fitted with d...

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

Holds 43mm OD hose on FLEXI CHUTES

12" FLUTED AGROWPLOW COULTER FOR SEED DRILL PCD 95mm with 5 Studs DWG 030-4055, ASP-08711  ASP lists this part as 12"

This sub-assembly fits the 400 Pasture Disc and the V slice Opener, also known as the Agrowdisc. Pairs with the 15-notch 15" Assembly: 110-3031. ...

Seed tube for the 400 Pasture Disc Assembly (see 405-1000 for complete unit). Part only, no nuts or bolts supplied with this part. Fits 38mm barflo...

Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...