Skip to content
ABOUT AGROWPLOW CONTACT US

Agrowdrill Components

Filters

  • SKU: 113-4047
    $113.40 - $113.40
    $113.40
    $151.20
    $151.20 - $151.20
    $151.20

    IDLER SHAFT 1" AD95/JPC

    $113.40 - $113.40
    $113.40
    $151.20
    $151.20 - $151.20
    $151.20
  • SKU: 115-7031
    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90

    GRUB SCREW M10 x 12 mm, SERRATED

    $2.17 - $2.17
    $2.17
    $2.90
    $2.90 - $2.90
    $2.90
  • SKU: 116-4003
    $96.08 - $96.08
    $96.08
    $128.10
    $128.10 - $128.10
    $128.10

    IDLER SHAFT 20mm

    $96.08 - $96.08
    $96.08
    $128.10
    $128.10 - $128.10
    $128.10
  • SKU: 115-7016
    $17.97 - $17.97
    $17.97
    $23.96
    $23.96 - $23.96
    $23.96

    Wheel nut M18 Fine thread 1.5

    Alt. Part SKU 115-716

    $17.97 - $17.97
    $17.97
    $23.96
    $23.96 - $23.96
    $23.96
  • SKU: 115-7017
    $27.13 - $27.13
    $27.13
    $36.18
    $36.18 - $36.18
    $36.18

    Wheel Stud M18x65 Fine thread 1.5

    M18 threaded wheel nut, 1.5 pitch (fine thread). Total length is 65mm, useable thread is 40mm. Knurl is 19.5mm OD and 15mm Long Alt. Part SKU 115...

    View full details
    $27.13 - $27.13
    $27.13
    $36.18
    $36.18 - $36.18
    $36.18
  • SKU: 139-2027
    $5.19 - $5.19
    $5.19
    $6.93
    $6.93 - $6.93
    $6.93

    WHEEL NUT 7/16" UNF

    Suits Agr-Hub 1

    $5.19 - $5.19
    $5.19
    $6.93
    $6.93 - $6.93
    $6.93
  • SKU: 160-3001
    $372.50 - $372.50
    $372.50
    $496.70
    $496.70 - $496.70
    $496.70

    Clutch limit switch SZL-WL-K-C01H

    $372.50 - $372.50
    $372.50
    $496.70
    $496.70 - $496.70
    $496.70
  • SKU: 136-1027
    $6.22 - $6.22
    $6.22
    $8.30
    $8.30 - $8.30
    $8.30

    60mm EXT CIRCLIP

    $6.22 - $6.22
    $6.22
    $8.30
    $8.30 - $8.30
    $8.30
  • SKU: 115-7005
    $9.09 - $9.09
    $9.09
    $12.13
    $12.13 - $12.13
    $12.13

    Bearing Housing ID52 Spherical (Two Piece)

    Two-piece bearing housing used to secure the 25.4mm spherical bearing to the Agrowdrill. Commonly found on older Agrowdrill models.The distance bet...

    View full details
    $9.09 - $9.09
    $9.09
    $12.13
    $12.13 - $12.13
    $12.13
  • SKU: 138-1100
    $7.49 - $7.49
    $7.49
    $9.99
    $9.99 - $9.99
    $9.99

    BEARING ID20 OD42 (6004 2RSH)

    SEALED DEEP GROOVE METRIC BALL BEARINGS

    $7.49 - $7.49
    $7.49
    $9.99
    $9.99 - $9.99
    $9.99
  • SKU: 640-4124
    $33.75 - $33.75
    $33.75
    $45.00
    $45.00 - $45.00
    $45.00

    TENSIONER OD50 80mm

    Chain tensioner made in engineering plastic, outer diameter 50mm, 80mm long.

    $33.75 - $33.75
    $33.75
    $45.00
    $45.00 - $45.00
    $45.00
  • SKU: 640-4076
    $93.15 - $93.15
    $93.15
    $124.20
    $124.20 - $124.20
    $124.20

    SPROCKET SIMPLEX 08B 25T 35mmBORE

    $93.15 - $93.15
    $93.15
    $124.20
    $124.20 - $124.20
    $124.20
  • SKU: 115-7019
    $2.22 - $2.22
    $2.22
    $2.97
    $2.97 - $2.97
    $2.97

    SET SCREW M8 x 16mm, GRADE 8.8, Zinc

    This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

    View full details
    $2.22 - $2.22
    $2.22
    $2.97
    $2.97 - $2.97
    $2.97
  • SKU: 113-4050
    $47.62 - $47.62
    $47.62
    $63.49
    $63.49 - $63.49
    $63.49

    SPROCKET SIMPLEX 10B 21T 1"BORE

    $47.62 - $47.62
    $47.62
    $63.49
    $63.49 - $63.49
    $63.49
  • SKU: 110-4085
    $35.54 - $35.54
    $35.54
    $47.38
    $47.38 - $47.38
    $47.38

    ADJUSTING ROD

    $35.54 - $35.54
    $35.54
    $47.38
    $47.38 - $47.38
    $47.38
  • SKU: 118-4353
    $145.26 - $145.26
    $145.26
    $193.69
    $193.69 - $193.69
    $193.69

    IDLE SHAFT VR654, AD300

    This idle shaft is made out of 25.4mm (1") Stainless steel and is 315mm long. It has a key-way machined in the entire length of the shaft for secur...

    View full details
    $145.26 - $145.26
    $145.26
    $193.69
    $193.69 - $193.69
    $193.69
  • SKU: 630-2014
    $483.75 - $483.75
    $483.75
    $645.00
    $645.00 - $645.00
    $645.00

    AD130 HITCH 3pt LINK ASSEMBLY

    $483.75 - $483.75
    $483.75
    $645.00
    $645.00 - $645.00
    $645.00
  • SKU: 153-1025
    $221.25 - $221.25
    $221.25
    $295.00
    $295.00 - $295.00
    $295.00

    MECHANICAL DEPTH STOP TO SUIT 153-4301 and 153-4302

    Mechanical Depth Stop to suit the cylinders on the AD230, AD240 and the AD140.

    $221.25 - $221.25
    $221.25
    $295.00
    $295.00 - $295.00
    $295.00
  • SKU: 117-4011
    $29.66 - $29.66
    $29.66
    $39.54
    $39.54 - $39.54
    $39.54

    Sprocket Drive Spacer 30mm

    Metal spacer used to space out sprockets by 30mm. Designed to fit onto a 50mm shaft. Alternate Part No.117-411

    $29.66 - $29.66
    $29.66
    $39.54
    $39.54 - $39.54
    $39.54
  • SKU: 115-3021
    $111.52 - $111.52
    $111.52
    $148.70
    $148.70 - $148.70
    $148.70

    GATE ADJUSTMENT LEVER

    $111.52 - $111.52
    $111.52
    $148.70
    $148.70 - $148.70
    $148.70
  • SKU: 155-1007
    $2.68 - $2.68
    $2.68
    $3.56
    $3.56 - $3.56
    $3.56

    HOSE CLAMP 25-51mm Stainless Steel

    Hose clamp is utilised on the 425 Tyne Assembly to hold the 38mm Barflo hose onto the Seed tube.

    $2.68 - $2.68
    $2.68
    $3.56
    $3.56 - $3.56
    $3.56
  • SKU: 113-4411
    $57.56 - $57.56
    $57.56
    $76.75
    $76.75 - $76.75
    $76.75

    SPROCKET SIMPLEX 10B 24T, 1" BORE

    24 TOOTH SIMPLEX SPROCKET, 5/8" PITCH, 25.4 (1") ID BORE

    $57.56 - $57.56
    $57.56
    $76.75
    $76.75 - $76.75
    $76.75
  • SKU: 130-4008
    $40.55 - $40.55
    $40.55
    $54.04
    $54.04 - $54.04
    $54.04

    U-bolt M20 150x200 Zinc

    M20 U-Bolt to secure to 150x200 RHS.

    $40.55 - $40.55
    $40.55
    $54.04
    $54.04 - $54.04
    $54.04
}