Agrowdrill Components

Two-piece bearing housing used to secure the 25.4mm spherical bearing to the Agrowdrill. Commonly found on older Agrowdrill models.The distance bet...

Chain tensioner made in engineering plastic, outer diameter 50mm, 80mm long.

This M8 set screw is 16mm long, zinc plated and is commonly used on the AD083 Seed Drills. It is used to secure the older AD083 Drive Offset Sprock...

Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

This M16 U-Bolt is grade 8.8 and is used to secure to 100x100 RHS. It has 55mm of working thread and an overall length of 152mm from the inside fac...

This idle shaft is made out of 25.4mm (1") Stainless steel and is 315mm long. It has a key-way machined in the entire length of the shaft for secur...

Mechanical Depth Stop to suit the cylinders on the AD230, AD240 and the AD140.

Metal spacer used to space out sprockets by 30mm. Designed to fit onto a 50mm shaft. Alternate Part No.117-411

Coulter discs are the active part of a coulter assembly responsible for cutting through trash ahead of the shank assembly on a seed drill. Agrowdr...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here.The gate hex shaft is...

Hose clamp is utilised on the 425 Tyne Assembly to hold the 38mm Barflo hose onto the Seed tube.

This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...

24 TOOTH SIMPLEX SPROCKET, 5/8" PITCH, 25.4 (1") ID BORE

36T PRIMARY DRIVE SPROCKET primarily used on the JPC2000. This sprocket is driven by a 10B chain.

M20 U-Bolt to secure to 150x200 RHS.

5/8" U-Bolt to secure to 4"x4" RHS. Similar to part 130-2010 with shorter length arms. *Old Part No. 130-425

5/8" U-Bolt to secure to 4"x4" RHS. Similar to part 130-4025 with longer length arms. Passivated parts may be supplied with zinc plating and ...

Ratchet ram used to adjust the operating and transport height of a range of Agrowplow products including Agrowdrill seed drills, Agrowdrill coulter...

Heavy Duty Implement Jack 5500kg (12000 lbs) Static Capacity 4500kg (10000 lbs) Winding Capacity Closed Length - Leg retracted 635mm (25") Cl...

Maximum Static Capacity: 3178kg (7000 lbs) Winding Capacity: 2,000kg (4,400lbs) Length: - Leg retracted: 520mm (20 ? ") Length - Leg extended...