325 Tyne Model

 Complete parts set for the 325 Tyne Assembly. The assembly includes coil tyne, a clamp to suit 100x100mm RHS, seed boot, and baker boot point.  ...

25mm coil tyne used as part of the Agrowdrill 325 Coil Tyne assembly on ADx20 series Agrowdrill direct drills. Use point adaptor 115-4009 to fit b...

Extended Baker boot point for the 325 Coil Tyne Assembly. The popular baker boot produces an inverted 'T' groove - an ideal micro-climate for seed...

Single seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 31.75mm (1¼ inch) in diameter. Also available with 38mm (1½ inch) dia...

Single seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 38mm (1½ inch) in diameter. Seed Tube Also available with 31mm (1¼ in...

Dual seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 31.75 mm (1¼ inch) in diameter. Also available with dual 38mm (1½ inch)...

Second seed tube to suit the 325 Coil Tyne Assembly. Mounts to the rear of the primary seed tube (114-3213). Fits 38mm barflo hose.

Second seed tube that enables double-chuting on tyne-based Agrowdrills. SUITS: 552, 425, 325, 732, and 700 tyne models Seed hose with an outsi...

Double chute kit suited to 325, 700, 732 tyne model. Comes with Double Outlet Seed Cup, 3 meter 31.75mm Hose Barflo, Hose Clamp, Seed Tube Rubber A...

31.75mm (1¼") seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m.This Barflo hose suits single-gate hous...

Double chute kit for Agrowdrills fitted with 325, 425, 700, or 732 tynes. Comes with: Double Outlet Seed Cup 3 meter 38mm Hose Barflo Hose Cl...

38mm (1½") seed tube hose. Supplied in 1m lengths per unit ordered. Maximum available coil length is 20m.This Barflo hose suits double-gate housing...

Adapts baker boot point to the 325 coil tyne. Carrier requires bolt one 1/2" x 2.1/2" UNC G8 Zinc (133-1090), one hex nut 1/2" UNC zinc (134-0070...

Bolt your tyne assembly onto your seed drill toolbars with the tyne clamp kit. Comes with Tyne clamp, bolt kit and wedge. Used in the 325, 425 and ...

Tyne clamp used as part of a tyne clamp assembly to secure Agrowdrill tynes to the machine toolbar. Suits 100mm x100mm RHS, for all 25mm coil sprin...

Fastener kit for the 732, 700, 425, and 325 tyne assemblies. Used to secure the tyne bolt clamp (115-3009). Includes an M16x200 bolt, plus a nut a...

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

Dual seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 38mm (1½ inch) in diameter. Also available with dual 31.75 mm (1¼ inch) ...