Products

This sub-assembly fits the 400 Pasture Disc and the V slice Opener, also known as the Agrowdisc. Pairs with the 15-notch 15" Assembly: 110-3031. ...

This sub-assembly fits the 400 Pasture Disc and the V slice Opener, also known as the Agrowdisc. Pairs with the 11-notch 15" Assembly: 110-3030. ...

RHS mounting plate clamping bracket.

RHS mounting carrier for 251 spring tyne and 401 disc assembly.

Fits the 401 disc and 251 tyne, this component centralized the bottom of the spring on the spring stem.

Engineering plastic locator for the spring of the 251 spring tyne assembly and 401 disc assembly.

Part of the 401 disc and 251 tyne assemblies, this component fits on the spring stem and secures the end of the spring.

This retaining washer fits the top of the spring stem in the 401 disc and 251 tyne assemblies.

Part of the spring stem of the 401 and 251 disc assemblies. This part fits at the top of the spring stem and fits under the rubber cushion.

This spring tension bar fits in the 401 double disc and 251 tyne assemblies. It secures the spring to the mounting carrier and the swing arm.

Spring tension bar for the 401 disc and 251 tyne assembly. This tension bar was specific to early production and has since been upgraded to 408-413...

Fitting into the 251 tyne assembly, part secures the spring stem into the swing arm.

Swivel pin which secures the carrier to the swing arm on the 401 disc assembly and the 251 tyne.

The 251 Spring Tyne Assembly suits the Agrowdrill AD730 and is a dependable and cost-effective undercarriage for a range of sowing applications. Th...

Seed tube delivery for the 251 tyne assembly. First seed tube.

251 tyne assembly arm.

Bolt your tyne assembly onto your seed drill toolbars with the tyne clamp kit. Comes with Tyne clamp, bolt kit and wedge. Used in the 325, 425 and ...

Extended Baker boot point for the 325 Coil Tyne Assembly. The popular baker boot produces an inverted 'T' groove - an ideal micro-climate for seed...

Second seed tube to suit the 325 Coil Tyne Assembly. Mounts to the rear of the primary seed tube (114-3213). Fits 38mm barflo hose.

Dual seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 31.75 mm (1¼ inch) in diameter. Also available with dual 38mm (1½ inch)...

Single seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 31.75mm (1¼ inch) in diameter. Also available with 38mm (1½ inch) dia...

Single seed tube to suit Agrowdrill 325 tyne assemblies. The outer tubing is 38mm (1½ inch) in diameter. Seed Tube Also available with 31mm (1¼ in...

This is the main arm of the 400 Pasture Disc assembly, see assembly 405-1000 for complete unit.

The pasture disc is a 'V' slice, seeding, offset disc assembly to mount on 100x100 RHS. It was used on ADx10 and ADx20 series Agrowdrills, such as ...

This part mounts the 400 Pasture Disc assembly to 100x100 RHS. This is the central mounting, for left and right offset mountings see parts 302-3005...

Seed tube for the 400 Pasture Disc Assembly (see 405-1000 for complete unit). Part only, no nuts or bolts supplied with this part. Fits 38mm barflo...

This bearing mount fits the 401 disc assembly and secures the hubs which the discs bolt to.

This spacer fits the 401 disc assembly and offsets the hub assemblies which the discs attach to.

16" Notched Disc used on the 401 Double Disc assembly (408-1001) Each 401 assembly requires a plain disc (408-4002) and a notched disc. The offset...

16" Plain Disc used on the 401 Double Disc assembly (408-1001) Each 401 assembly requires a plain disc and a notched disc (408-4001). The offset d...

Part of the 401 double-disc unit this is the swing arm which mounts to the RHS carrier and holds the disc assemblies.

This is a parts set for the 401 Double Disc assembly. The assembly comes with mounting, hardware and discs. The 401 Double Disc Assembly is the id...

Seed tube to suit the Agrowdrill 435 Coil Tyne assembly. Fits 38mm Barflo seed hose 219-4010. Single chute seeding suits seed cup 113-3112. NOTES...

Suits 425 tynes and secures the seed tube to the tyne.

This wedge helps to fit the 425 coil tyne assembly to the Agrowdrill 100x100mm RHS toolbar. Horizontal tynes will require 115-3010. It is also suit...

The heavy-duty spring tyne assembly with 720mm of frame clearance and 550 pounds break out. Assembly comes with mounting and point. Seed tube, seed...

Tyne stem which secures into the swing arm of the 551 HD Spring Tyne Assembly for the AD730. This is a female stem that suits a male point such as ...

552 HD Spring Tyne seed and fertilser delivery tube. This part fixes to the back of the spring tyne stem and delivers the material from the 38mm Ba...

Male tyne stem to suit the 552 HD Tyne Assembly. It supersedes the female tyne equivalent 409-3006 for the 551 HD Tyne Assembly. This stem comes wi...

Second seed tube that suits both 700 and 732 Coil Tyne Assemblies. Has an outside diameter of 38mm (1-1/2"). Supplied with mounting hardware (2 x...

Single seed tube that suits the 700 Coil Tyne. The outside diameter of tube is 38mm (1-1/2") and it has mounting hole threaded with 5/16" UNC.

Clamp assembly to mount the 732 coil tyne to the toolbar. Ships with clamp plate, U-bolts, and hardware.

Single seed tube that suits the 732 Coil Tyne. The outside diameter of tube is 38mm (1-1/2") and it has mounting hole threaded with 3/8" UNC.  Sup...

Farmscan area meter sensor. Includes packard connection wth tail and mounting bracket. *Old Part No. 114-463

This Offset Mount is to suit older AD083 models and has been designed to have 3 x M8 bolts attaching it to the AD083 drive sprocket. This item is ...