Agrowdrill Components

Single outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

Single outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

Double outlet seed cup for Agrowdrill seed boxes to suit the double-gate system. Double gate housings suit seed hoses with 38mm (1½") diameter.  Th...

This 20mm Hex Shaft is made out of 304 Stainless and is 3.6M long. A longer 4.8M stainless steel hex shaft is available here.The gate hex shaft is ...

Special washers made for the seed box on Agrowdrills. Used on the gate arms and varibox adjustment arms.

Double outlet seed cup for Agrowdrill seed boxes to suit the single-gate system on older machines. Suits seed hoses with 31mm (1¼") diameter. Als...

SKF Carbon steel drive chain. Comes in a 3m length. Joiner links may be required. ANSI Chain Size: 10B-1 Strands: Single Pitch (mm): 15.875 or 5/8"...

This flanged bearing housing is used to secure the 20mm spherical bearing to the Agrowdrill. Two are used per bearing assembly and are commonly fou...

Rear tow hitch for the Agrowdrill AD083 seed drill. A rear tow hitch enables trailing machines to be hitched to the rear of the seed drill or ploug...

This Posi Pan Screw is used in tandem with a stainless steel spring washer to fasten the Plastic Roller Bearing Assembly onto the stainless steel v...

This stainless steel screw tek is used to fasten the single gate and double gate housings to the hopper. Great care must be taken in ensuring that ...

This spacer ring has an ID of 60mm and is primarily used on Drive & Wheel arm assemblies.

(x2) offsets are required to update an AD230. This is intended to shift the front tynes forward by 150mm in the case that the tyne is fitted with d...

This M16 U-Bolt is grade 8.8 and is used to secure to 100x100 RHS. It has 55mm of working thread and an overall length of 152mm from the inside fac...

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

Sealed bearing, fits onto a 60mm shaft and is pressed into a machined sprocket or housing of 78mm in diameter.  Commonly utilised in JPC2000 Wheel ...

Wheel nut used on Titan hub 90-8

Heavy-duty cast baker boot point to fit various seed drills. There are two diamond-edged tiles on the leading edge with hardfacing on the sides beh...

Seed tube for the 400 Pasture Disc Assembly (see 405-1000 for complete unit). Part only, no nuts or bolts supplied with this part. Fits 38mm barf...

Suits small seed box.

Suits small seed box.

Holds 43mm OD hose on FLEXI CHUTES

12" FLUTED AGROWPLOW COULTER FOR SEED DRILL PCD 95mm with 5 Studs DWG 030-4055, ASP-08711  ASP lists this part as 12"

This sub-assembly fits the 400 Pasture Disc and the V slice Opener, also known as the Agrowdisc. Pairs with the 15-notch 15" Assembly: 110-3031. ...

Rear tow hitch to suit the AD240 Agrowdrill. Mounts centrally to 100x100mm RHS. Has Hydraulic mounts to suit 3/8" hose. Comes with Hydraulic clamps...

Two-piece bearing housing used to secure the 20mm spherical bearing to the Agrowdrill. Commonly found on the original Agrodrill and older models.Th...

Joiner link to suit 10B chain. Alternate Part No.137-160

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

Coulter discs are the active part of a coulter assembly responsible for cutting through trash ahead of the shank assembly on a seed drill. Agrowdr...

This 20mm Hex Shaft is made out of 304 Stainless and is 4.8M long. A shorter 3.6M stainless steel hex shaft is available here.The gate hex shaft is...

This 25.4mm shaft is made out of stainless steel and is 350mm long. The machined groove is the entire length of the shaft and assists with the secu...