Agrowdrill

Swing arm which secures the tyne in the 551 heavy-duty shank assembly.

The 551 tyne spring guide secures inside the spring between the carrier and the arm.

Part of the 551 heavy duty spring tyne assembly, this nylon sleeve fits into the top of the spring mounting and aligns the rocker plate.

551 tyne assembly spring.

Swivel pin which secures the spring to the swing arm in the 551 heavy duty spring tynes assembly.

Swivel pin which secures the tyne mounting and the swing arm of the 551 and 552 heavy duty spring tyne assembly.

Sprocket assembly comes with bearing insert (138-4020). Fits on 25.4mm shaft. Sprocket transfers from 08B chain to 10B chain. Old Part No. 113-357...

Sprocked that transfers between two 08B chains. Fits a 25.4mm shaft. Comes with bearing 138-4020.  Old Part No. 124-401 Model SKU: 124-4001; Chai...

Transfers 08B chain between 21 and 32 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Part No. 124-499 Mod...

Sprocket assembly to transfer 08B chain between 21 and 46 teeth. Fits on 50mm shaft. Comes standard with bearing inserted (138-4050). *Old Part No....

This sprocket assembly is used on the AD083 drive wheel arm assembly. It comes fitted with 2 x bearings to suit a 50mm shaft. It has 3 x M10 tapped...

Sprocket assembly to transfer 10B chain between 21 and 36 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Pa...

Supplied with bearing 138-4020.

This sprocket clutch assembly comes with 2 bearings installed to suit a 1" shaft (25.4mm). The overall length of the assembly is 110mm. The length ...

Sprocket clutch 30/21T with bearing 138-1100.

Simplex sprocket, suits 08B chan with 30 teeth. Sprocket secures to a 50mm shaft with both key way (14mm) and grub screws (M8). This part supersede...

Sprocket with two sets of 36 teeth designed for 10B chain. Includes bearing 138-4052.

Sprocket with 30 and 36 teeth that suits the DF1000. Includes bearing 138-4051.

Plate sprocket to suit 08B chain with 30 teeth. Suits seed drill clutch assembly. Old Part No. 660-413

Simplex sprocket, suits 08B chain with 14 teeth. Sprocket secures with grub screws to a 25mm shaft. Suits ADx30 series Agrowdrills. Model SKU: 11...

Simplex sprocket, suits 08B chain with 15 teeth. Sprocket secures with grub screws to a 25mm shaft. Suits the JPC2000.

Simplex sprocket, suits 08B chain with 20 teeth. Sprocket secures with grub screws to a 50mm shaft. Model SKU: 630-4111; Chain: 08B; Teeth: 20; Sh...

Simplex sprocket, suits 08B chain with 21 teeth. Sprocket secures with grub screws to a 20mm shaft. Old Part No. 115-420 Model SKU: 115-4020; Cha...

Simplex sprocket, suits 08B chain with 21 teeth. Sprocket secures with grub screws to a 25.4mm shaft. Old Part No. 113-451 Model SKU: 113-4051; C...

Simplex sprocket, suits 08B chain with 24 teeth. Sprocket secures on a 20mm shaft with grub screws. Model SKU: 630-4110; Chain: 08B; Teeth: 24; Sh...

Simplex sprocket, suits 08B chain with 27 teeth. Sprocket fits to a 20mm shaft and secures with grub screws. Identical to part 630-4119

Simplex sprocket, suits 08B chain with 60 teeth. Sprocket fits to a 20mm shaft and secures with grub screws.

24 Tooth Simplex sprocket to suit a 10B Chain. It has been machined out to suit a 60mm shaft. Predominately used on the AD95. Alternate Part No. 11...

36T PRIMARY DRIVE SPROCKET primarily used on the JPC2000. This sprocket is driven by a 10B chain.

Fabricated fixed idler sprocket. Suits 08B chain with two 21 tooth sprockets. Sprockets secure with grub screws to a 25.4mm shaft.

Dust cap or Hub cap to suit the 50 series hub used on the AD130.

6 x 205 PCD HUB and STUB assembly. Suits the AD230 and AP51 Alt Part Number: SKU 139-2038

6 x 205 PCD HUB and STUB assembly. SUITS THE AD240

Tension spring used in the current AD140 drive assembly. It is made out of 6.3mm Wire Gal, has an OD of 59mm and has around 28 total coils. This sp...

Chain tensioner made in engineering plastic, outer diameter 30mm, 50mm long. Supplied with nut to secure in drive assembly. *Old Part No. 124-485

Chain tensioner made in engineering plastic, outer diameter 30mm, 55mm long. Supplied with nut to secure in drive assembly.

Chain tensioner made in engineering plastic, outer diameter 30mm, 75mm long. Supplied with nut to secure in drive assembly.

Chain tensioner made in engineering plastic, outer diameter 40mm, 105mm long.

Chain tensioner made in engineering plastic, outer diameter 40mm, 135mm long.

Chain tensioner made in engineering plastic, outer diameter 30mm, 50mm long. Equivalent Part No. 124-4085

Chain tensioner made in engineering plastic, outer diameter 50mm, 40mm long. Supplied with nut to secure in drive assembly. *Old Part No. 124-484

Nylon chain tensioner cut from 70mm rod. Used on seed drill assemblies including the 13 and 18 run Agrowpdrills and the 3000 and 3400 seed drill mo...

(x2) offsets are required to update an AD230. This is intended to shift the front tynes forward by 150mm in the case that the tyne is fitted with d...

Top cylinder pin commonly used on the 3000 series Agrowdrill. It is made out of a 25.4mm bright shaft, is 250mm long and comes with two holes drill...